How to connect PANASONIC to Avantree transmitters and dongles?

BLUETOOTH PAIRING

Connect Panasonic Headphones or Speakers to an Avantree Transmitter

Put both devices into pairing mode, then keep them close together while they connect.

Watching TV or video? Many Panasonic Bluetooth products do not support aptX Low Latency. You may notice a delay between the picture and sound.

Step 1 – Turn Off Nearby Bluetooth Devices

Turn off Bluetooth on nearby phones, tablets, computers, or other devices that have connected to your Panasonic headphones or speaker before. This helps prevent it from reconnecting to another device during setup.

Step 2 – Put Your Panasonic Device in Pairing Mode

Select your Panasonic model below. If your model is not listed, check its user guide for Bluetooth pairing instructions.

RP-HD600N, RP-HD605N, RP-HD610N, or RP-HD805N

1. Make sure the headphones are turned off.
2. Press and hold the Power button for about 5 seconds.

Flashing RED and BLUE = Bluetooth pairing mode

RZ-S500W Earbuds

First-time pairing: Remove the earbuds from the charging case. They should enter pairing mode automatically.

Pairing with another device:

1. Remove both earbuds from the charging case.
2. Touch and hold the left or right touch panel for about 7 seconds.

Flashing RED and BLUE = Bluetooth pairing mode

RB-M500B, WINGS BTS50, EAH-F50B, or EAH-F70N

1. Make sure the headphones are turned off.
2. Press and hold the Power button for about 5 seconds.

Flashing RED and BLUE = Bluetooth pairing mode

BTG-S10

1. Turn on the headphones.
2. Press and hold the Bluetooth button for about 2 seconds.

Flashing MAGENTA and RED = Bluetooth pairing mode

Step 3 – Put the Avantree Transmitter in Pairing Mode

Put your Avantree transmitter or dongle into Bluetooth pairing mode. The button and light can differ by model, so check its user guide if needed.

Step 4 – Wait for the Connection

1. Keep the Panasonic device and Avantree transmitter close together.
2. Make sure both devices are in pairing mode at the same time.
3. Wait a few seconds for the connection to complete.

Still Not Connecting?

Still Need Help?

Contact Avantree Support for additional pairing assistance.

Contact Avantree Support