How to connect Bose headphones & speakers to Avantree transmitters and dongles? – Avantree Support

BLUETOOTH PAIRING

Connect Bose Headphones or Speakers to an Avantree Transmitter

Put both devices into pairing mode at the same time, then keep them close together while they connect.

Important: Your Bose device must be in Bluetooth pairing mode, not simply turned on.

Step 1 – Turn Off Bluetooth on Nearby Devices

Turn off Bluetooth on any phone, tablet, computer, or other device that has connected to your Bose headphones or speaker before. This prevents the Bose device from reconnecting to another device during setup.

Step 2 – Put Your Bose Device in Pairing Mode

Select your Bose model below. If your model is not listed, check its user guide for Bluetooth pairing instructions.

Bose QuietComfort 35 (QC35)

Turn on the headphones.
Slide and hold the Power switch toward the Bluetooth symbol.
Release when you hear “Ready to connect”.

Flashing BLUE = Bluetooth pairing mode

Bose 700

Turn on the headphones.
Press and hold the Power button for about 3 seconds.
Release when you hear “Ready to connect another device.”

Slowly pulsing BLUE = Bluetooth pairing mode

Bose QuietControl 30

Turn on the headphones.
Press and hold the Power / Bluetooth button.
Release when you hear “Ready to pair.”

Flashing BLUE = Bluetooth pairing mode

Bose QuietControl 30 Bluetooth pairing mode

Bose SoundLink Revolve or Revolve+

Turn on the speaker.
Press and hold the Bluetooth button.
Release when you hear “Ready to connect another device.”

Flashing BLUE = Bluetooth pairing mode

Bose SoundLink Revolve Bluetooth pairing mode

Bose SoundLink Mini II

Turn on the speaker.
Press and hold the Bluetooth button.
Release when you hear “Ready to pair another device.”

Flashing BLUE = Bluetooth pairing mode

Bose SoundLink Mini II Bluetooth pairing mode

Bose SoundLink Color II

Turn on the speaker.
Press and briefly hold the Bluetooth button.

Slowly flashing BLUE = Bluetooth pairing mode

Step 3 – Put the Avantree Transmitter in Pairing Mode

Put your Avantree transmitter or dongle into Bluetooth pairing mode. The button and indicator light can differ by model, so check its user guide if needed.

Step 4 – Wait for the Connection

Keep the Bose device and Avantree transmitter close together.
Make sure both devices are in pairing mode at the same time.
Wait a few seconds for the connection to complete.

When connected, the pairing lights should stop flashing. Your Bose device is ready to use.

Watch the Pairing Videos

Bose headphones

Bose speakers

Bose Still Will Not Connect?

Clear Pairing History and Try Again

First, turn off Bluetooth on nearby devices. Then put the Bose device and Avantree transmitter into pairing mode again at the same time.

If they still do not connect, clear the Bluetooth pairing history on both devices and pair them again.

Bose Reset Instructions

Using Bose headphones for TV? Bose headphones in this guide do not support aptX Low Latency, so you may notice audio or lip-sync delay when watching TV or video.

Still Need Help?

Contact Avantree Support for additional pairing assistance.

Contact Avantree Support