Skip to main content
Sign in
Deutsch Español Français Italiano 日本語（日本） 中文 (香港)
Category List
  • Updated

Avantree-Avantalk APP Setup Guide

  • Updated

START HERE

Avantree–Avantalk App – Setup Guide

Use the App to manage supported devices, adjust settings, update firmware, and access features such as Auracast.

Connect through Bluetooth First

Connect your Avantree device through your phone’s Bluetooth Settings first. Then open the Avantree–Avantalk App.

Step 1 – Download the App

Download and install the Avantree–Avantalk App.

Install the App, but do not add your device yet.

Step 2 – Connect Your Device to Your Phone

  1. Open your phone’s Settings → Bluetooth.
  2. Turn Bluetooth ON.
  3. Put your Avantree device into Bluetooth pairing mode.
  4. Select your Avantree device from the Bluetooth list.
  5. Wait until your phone shows Connected.
Your device must show Connected in the phone’s Bluetooth Settings before you add it to the App.

Step 3 – Open the App

Open the Avantree–Avantalk App. Choose Create an Account or Skip as Visitor.

Step 4 – Add Your Device

  1. Tap Add Device.
  2. Select your Avantree model.
  3. Tap Connect.
Tap Add Device in the Avantree Avantalk App
Select the correct Avantree model in the App
Connect the selected Avantree device in the App
Example: Add Device → Infinity NC → Connect

Firmware Update Available?

  1. Tap Update or Update Now.
  2. Keep your phone and Avantree device close together.
  3. Keep the App open and the device turned on.
  4. Wait until the App shows that the update is complete.
Firmware update screen in the Avantree Avantalk App
Do not close the App or turn off the device during the update.

If no update appears, open your device in the App and select ⚙ Settings → Firmware Version.

Some models must be factory reset after updating. Follow the reset guide for your exact model.

What Can I Do in the App?

Equalizer

Choose a preset or adjust Custom EQ.

ANC

Switch between ANC and Normal Mode.

Firmware

Check for and install available updates.

Auracast

Search for and select available broadcasts.

Using Auracast?

Only follow these steps if your Avantree device supports Auracast.

  1. Turn on the Auracast transmitter or broadcast source.
  2. Confirm its Auracast broadcast is on.
  3. Stay within about 2 m / 6 ft.
  4. Stop Bluetooth music or other audio playing from your phone.
  5. Open the Avantree–Avantalk App.
  6. Tap Auracast → Scan, then select the broadcast.

Something Doesn’t Look Right?

App Cannot Find My Device
  1. Close the App.
  2. Open your phone’s Bluetooth Settings.
  3. Connect your Avantree device.
  4. Confirm it shows Connected.
  5. Open the App and tap Add Device.
Firmware Update Does Not Start
  • Confirm the device is connected to your phone.
  • Keep both devices close together.
  • Make sure the Avantree device has enough battery power.
  • Reopen the App and check Device → ⚙ Settings → Firmware Version.
Cannot Find an Auracast Broadcast
  • Confirm the Auracast transmitter and broadcast are on.
  • Confirm your headphones or earbuds support Auracast.
  • Stay within about 2 m / 6 ft.
  • Stop Bluetooth audio playing from your phone.
  • Tap Auracast → Scan again.

Need More Infinity NC Help?

See all setup and troubleshooting guides for this product.

View Infinity NC Support

Still Having Trouble?

Contact the Avantree support team for additional assistance.

Contact Avantree Support

Comments

0 comments

Related articles

Please sign in to leave a comment.