How to Connect Transmitter to Phone? – Avantree Support

Phone / Tablet Connection

Connect the Transmitter to Your Phone

Follow these steps to connect your phone or tablet to the Harmony 2 transmitter via Bluetooth.

Make sure the transmitter is in Phone mode.

Set the transmitter's Audio Input switch to Phone before pairing.

Start by switching the transmitter's Audio Input to Phone.

On the transmitter, move the Audio Input switch to Phone.

Audio Input OPT/AUX Phone

Look for a flashing white Phone LED A flashing white light means the transmitter is in pairing mode.

Open the Bluetooth settings on your phone or tablet and select:

Bluetooth device name Avantree Flex Base

Connected successfully The Phone LED becomes solid white after the Bluetooth connection is established.

STILL NOT CONNECTING?

If Avantree Flex Base does not appear on your phone or tablet, manually put the transmitter into pairing mode.

4 seconds

Press and hold the Phone button for 4 seconds.

Keep the Audio Input switch set to Phone. The Phone LED will flash white when pairing mode is active.

Phone

Before trying again, confirm these three items.

Audio Input Phone

Bluetooth Name Avantree Flex Base

Pairing Mode Hold Phone for 4 Seconds