Slumber 2 - How to Remove & Install Pillowcase? – Avantree Support

START HERE

Slumber 2 – How to Remove & Install the Pillowcase

Follow these simple steps to remove, wash, and reinstall the Slumber 2 pillowcase.

1. Unzip the pillowcase.

Open the zipper completely.

2. Remove the speaker unit.

Gently slide the inner speaker unit out of the pillowcase. Do not pull or force it.

✓ Done. The pillowcase is ready to wash.

Wash the Pillowcase

The pillowcase only can be hand-washed or machine-washed using a mild detergent.

Let the pillowcase air dry completely before putting the speaker unit back inside.

Important: Remove the inner speaker unit before washing. Do not wash the speaker unit.

1. Make sure the pillowcase is completely dry.

Do not reinstall the speaker unit while the fabric is wet or damp.

2. Slide the speaker unit inside.

Gently insert the inner speaker unit back into the pillowcase.

3. Check the direction.

Make sure the side marked “BACK” faces the zipper.

BACK → Zipper

4. Close the zipper.

Make sure the speaker unit sits flat inside the pillowcase, then zip it closed completely.

✓ Done! Your Slumber 2 is ready to use.

Tips for Reinstalling the Pillowcase

Do not force the speaker unit in. Straighten the pillowcase first if it is difficult to insert.
Do not install it while the pillowcase is damp. Let it dry completely.
Check the direction before zipping. The side marked “BACK” should face the zipper.
Do not force the zipper. If it gets stuck, check that the fabric or speaker unit is not blocking it.
Sound different after reinstalling? Open the pillowcase and make sure the speaker unit is flat and correctly positioned.

Need More Slumber 2 Help?

If you are having trouble removing or reinstalling the pillowcase, submit a support request.