Slumber 2 - How to Factory Reset – Avantree Support

START HERE

Slumber 2 – How to Factory Reset / Clear Pairing History

Reset the Bluetooth pairing history if your Slumber 2 will not reconnect or keeps connecting to the wrong device.

When Should I Reset the Slumber 2? Reset the Slumber 2 if it will not reconnect, connects to the wrong device, or continues to have Bluetooth pairing problems.

Before You Start

Turn Bluetooth OFF on nearby phones, tablets, and computers that were previously paired with the Slumber 2.

Why? This prevents the Slumber 2 from reconnecting to the wrong device after the reset.

Step 1 – Turn On the Slumber 2

Turn the Slumber 2 remote ON and make sure it is in Bluetooth (BT) mode.

Step 2 – Clear the Bluetooth Pairing History

In BT mode, press and hold these two buttons together for 10 seconds:

10 seconds

Keep holding both buttons until the BT LED turns pink.

PINK = Pairing history cleared

✓ Reset complete. This clears the pairing history and puts the Slumber 2 into pairing mode, flashing red & blue .

Important: Press both buttons at the same time and hold them until the BT LED turns pink.

Step 3 – Pair the Slumber 2 Again

After the reset, connect the Slumber 2 to your phone, tablet, or computer again.

Open Bluetooth Settings.
Look for Slumber 2.
Select it to connect.
Wait for the connection to finish, then test the sound.

Slumber 2 Connects to the Wrong Device Again?

Turn Bluetooth OFF on the old phone, tablet, or computer. Then put the Slumber 2 into pairing mode and connect it to the device you want to use.

Slumber 2 Does Not Appear on My Phone?

Check the BT light. It should be:

RED & BLUE flashing = Ready to pair

If the BT light is not flashing red and blue, press and hold the BT button for 3 seconds to enter pairing mode. Then search for Slumber 2 again.

Reset Worked, but Still Not Connecting?

Restart your phone, tablet, or computer.
Turn Bluetooth OFF and back ON.
If Slumber 2 is still saved, select Forget or Remove Device.
Put the Slumber 2 into pairing mode again.
Reconnect it as a new Bluetooth device.

Need More Slumber 2 Help?

View Slumber 2 Guides

Still Not Connecting?

If the reset was successful but Bluetooth still does not work, submit a support request.

Contact Avantree Support