Before You Start: If your Harmony speakers have no sound, the transmitter may not be receiving audio, the speakers may be disconnected, or the volume may be too low.
Turn ON the transmitter and speakers, then play a TV program, video, or music with sound.
Step 1 – Check the Transmitter's Audio Signal
If using Optical or AUX, check the OPT / AUX indicator on the transmitter.
Solid WHITE – Audio signal detected. If there is still no sound, continue to Step 2.
Flashing WHITE – No valid audio signal detected. Check the audio settings below.
Make sure the transmitter's input switch matches your audio connection.
Optical – TV Connection
- Open your TV's Settings → Sound / Audio.
- Set Sound Output to Optical / Digital Audio Out.
- Set Digital Audio Format to PCM / Stereo.
▶ Find PCM Settings for Your TV →
Why PCM? Some TVs send audio in a format the transmitter cannot play. PCM provides a compatible digital audio signal.
AUX / 3.5 mm – TV Connection
- Set TV Sound Output to Headphones / Audio Out, if required.
- Increase the TV volume and make sure it is not muted.
Bluetooth – Phone / Tablet Connection
- Press and hold the transmitter's Phone / Pair button for approximately 4 seconds.
- Wait for the indicator to flash RED and BLUE.
- On your phone or tablet, open Bluetooth settings and select Avantree Base Flex.
- Once connected, play audio to test.
Step 2 – Check the Speaker Connection
Check the LED on each speaker.
Solid WHITE – Connected to the transmitter.
Flashing WHITE – Searching for the transmitter.
Flashing RED and BLUE – In Bluetooth pairing mode, not connected to the transmitter.
Make sure the speaker is in Broadcasting Mode, not Bluetooth Mode.
Flashing RED and BLUE? Double-press the M button until you hear “Broadcasting Mode.”
- Move the speaker closer to the transmitter.
- Wait 5–10 seconds for the LED to turn Solid WHITE.
- If it still does not connect, turn the speaker OFF and ON, then wait for it to reconnect.
Still Not Connected? Follow the pairing guide below.
Harmony – How to Pair Additional Speakers →Step 3 – Check the Cable, Volume & Restart
- Ensure the audio cable is securely connected to the transmitter and TV.
- Check the audio cable connection on the transmitter. Use only one audio cable.
- Optical: Make sure the cable is securely plugged into OPT IN.
- AUX / 3.5 mm: Make sure the cable is securely plugged into AUX IN.
- Increase the volume on the audio source and speakers.
- Try another TV channel, video, or app.
- Turn the transmitter and speakers OFF, wait 10 seconds, then turn them back ON.
Still No Sound? If using Optical or AUX, try a NEW audio cable of the same type.
Still Need Help?
Please contact Avantree Support and tell us:
- Your connection type: Optical, AUX, or Bluetooth.
- The LED color and status on each speaker: Solid WHITE, Flashing WHITE, or Flashing RED and BLUE.
- Whether the transmitter's OPT / AUX indicator is Solid or Flashing WHITE, if using Optical or AUX.
Comments
0 comments
Related articles
Please sign in to leave a comment.