Skip to main content
Sign in
Deutsch Español Français Italiano 日本語（日本） 中文 (香港)
Category List
  • Updated

Harmony Fix Bluetooth (Mode) Pairing

  • Updated

START HERE

Harmony Speaker Not Connecting by Bluetooth?

If your Harmony will not connect to your phone, tablet, or computer, follow these steps in order.

Bluetooth Mode and Bluetooth Pairing Mode are different.

Bluetooth Mode allows Harmony to use Bluetooth.

Bluetooth Pairing Mode means Harmony is ready to connect to a new device.

Step 1 – Turn Bluetooth Off on Nearby Devices

Harmony may automatically connect to a Bluetooth device it used before.

Turn Bluetooth OFF on all nearby phones, tablets, computers, and TVs. You will turn Bluetooth ON only on the device you want to pair in Step 3.

Step 2 – Put Harmony in Bluetooth Pairing Mode

Press the M button once.

Flashing Red and Blue — Ready to pair

Not flashing Red and Blue?

Press and hold the M button for 7 seconds.

Release the button when the light starts flashing Red and Blue.

Step 3 – Connect the Device You Want to Use

Important: Keep Bluetooth OFF on all other nearby devices while Harmony is in pairing mode.

Turn Bluetooth ON only on the phone, tablet, or computer you want to connect to Harmony.

For example, if you want to use your phone, turn Bluetooth ON only on that phone.

Before continuing, Harmony should still show:

Flashing Red and Blue — Ready to pair
  1. Open Bluetooth Settings on the device you want to use.
  2. Turn Bluetooth ON.
  3. Find Avantree Harmony.
  4. Select Avantree Harmony.
  5. Wait for it to connect.
Solid Blue — Harmony is connected.

Play some audio to test the speaker.

Still Not Connecting?

Can't Find Avantree Harmony?

Check the Harmony Bluetooth light.

Flashing Red and Blue — Ready to pair

If it is not flashing Red and Blue, press and hold the M button for 7 seconds.

Keep Bluetooth OFF on other nearby devices. Search for Avantree Harmony again on the device you want to pair.

Solid Blue — Connected successfully.
Avantree Harmony Appears but Won't Connect?

Your device may have an old Bluetooth connection saved.

  1. Find Avantree Harmony in Bluetooth Settings.
  2. Select Forget, Remove, or Unpair.
  3. Turn Bluetooth OFF.
  4. Wait 5 seconds.
  5. Turn Bluetooth ON again.
  6. Press and hold the M button for 7 seconds.
  7. When the light flashes Red and Blue, search for Avantree Harmony and connect again.
Solid Blue — Harmony is connected.
Still Not Connecting? Reset Harmony

Try this last. Complete the pairing steps above first.

  1. Press the M button once to enter Bluetooth Mode.
  2. Press and hold the M button for 5 seconds to reset Harmony.
  3. Remove Avantree Harmony from your device's Bluetooth list.
  4. Keep Bluetooth OFF on all other nearby devices.
  5. Press and hold the M button for 7 seconds.
  6. Wait for the light to flash Red and Blue.
  7. Turn Bluetooth ON only on the device you want to pair. Search for Avantree Harmony and connect again.
Solid Blue — Harmony is connected successfully.

Something Doesn't Look Right?

Explore more Harmony setup and troubleshooting guides.

View All Harmony Guides

Still Need Help?

Please tell Avantree Support:

  • What device you are trying to connect.
  • Whether the Harmony light is Flashing Red and Blue or Solid Blue.
  • Whether Avantree Harmony appears in the Bluetooth list.
  • What happens when you try to connect.
Contact Avantree Support

Comments

0 comments

Related articles

Please sign in to leave a comment.