HT5009 Power and Connect

HT5009 headphones and transmitter connect automatically within 5 seconds of being powered on and charged.

Quick Check

Charge the headphones if the battery may be low.

• Red LED = Charging
• LED turns off = Fully charged
• Suggested power source specification: 5V /0.5-2A

Power on the transmitter.

• Connect it to power using the included USB cable.
• Turn the power switch to ON.

Power on the headphones.

• Older version: Press and hold the Power/MFB button until the LED flashes blue.
• Newer version (Batch T22B1 and later): Slide the power switch to ON.

Wait 2–5 seconds for the connection. Confirm they're connected.

• Headphone LED is solid blue.
• Transmitter A and LL lights are solid white.
• You hear "Connected" in the headphones.

Not connected?

• Turn both the headphones and transmitter off. 
• Turn them back on and wait again.
• If they still won't connect,  👉How to fix if headphones and transmitter doesnt connect?

Most Common Issues: 

The headphones may be out of battery, the transmitter may not have power, the devices may need to be restarted, or the headphones may need to be reconnected to the transmitter.

💡 Tip:

The HT5009 is factory locked, so you do not need to pair the headphones every time. Simply power on both devices and they should reconnect automatically within a few seconds.

 Still not working?