Set Up 2: Connect Bluetooth Headphones / Speakers to Orbit

Follow these three steps to connect your Bluetooth headphones or speakers to the Avantree Orbit.

You will power on Orbit, put your headphones or speakers into Bluetooth pairing mode, and select them on Orbit's screen.

Before you start: Temporarily turn off Bluetooth on nearby phones, computers, or other devices that were previously paired with your headphones.

If possible, also turn off nearby TVs and Wi-Fi devices during pairing to reduce interference.

Power On Orbit

Connect Orbit to a power source using the supplied USB-C cable.

Move the power switch to the ON position.

Orbit power switch highlighted in the ON position — Move Orbit's power switch to ON.

Power requirement: 5V / 500mA–2A. You may temporarily use a separate USB power source while pairing.

If you need a wall-plug adapter, contact support@avantree.com .

Put Your Headphones / Speakers into Pairing Mode

Your headphones or speakers must be in Bluetooth pairing mode so Orbit can find them.

First Time Using Your Headphones / Speakers?

Many Bluetooth headphones and speakers automatically enter pairing mode when turned on for the first time.

Look for a flashing Bluetooth indicator or a voice prompt indicating pairing mode.

Previously Connected to Another Device?

Simply turning on the headphones or speakers is usually not enough.

You must manually activate Bluetooth pairing mode. The exact button combination depends on the model.

Refer to your device's user manual or choose a brand below.

Important: Power ON and Bluetooth pairing mode are not the same thing. Make sure your device is actively searching for a new Bluetooth connection.

Need Help Entering Pairing Mode?

Choose your headphone or speaker brand to view its pairing instructions.

Apple AirPods / AirPods Pro ↗ Apple AirPods Max ↗ Sony Headphones ↗ Bose Headphones / Speakers ↗ Beats Headphones / Speakers ↗ JBL Headphones / Speakers ↗ Jabra Headphones / Speakers ↗

Can't find your brand? Search for your exact headphone or speaker model followed by "Bluetooth pairing mode".

Find and Connect Your Device on Orbit

1 Press the Search Button

Press the magnifying glass button on Orbit to search for nearby Bluetooth devices.

Orbit magnifying glass Search button highlighted — Press the magnifying glass button to search for Bluetooth devices.

2 Select Your Headphones / Speakers

When Orbit displays nearby devices, use the Up / Down buttons to highlight your headphone or speaker name.

Orbit Up and Down navigation buttons highlighted below its display — Use the Up and Down buttons to highlight your device.

3 Press Enter to Connect

Press the Enter button to select the highlighted device.

Orbit Enter button highlighted on the right side of its display — Press Enter to connect to the selected device.

Wait a few seconds while Orbit establishes the Bluetooth connection.

4 Confirm Connected Status

Once connected, Orbit will display "Connected" below the selected device name.

Orbit screen showing the Bluetooth device connected successfully — The word "Connected" confirms successful Bluetooth pairing.

Bluetooth Connection Successful

Your headphones or speakers are now connected to Orbit.

✓

What Do the Indicators on Orbit Mean?

After connecting successfully, you may see the following indicators at the top of Orbit's screen.

TX Transmitter mode

OPT / AUX Audio input connection

FS / SBC / aptX LL Active Bluetooth audio codec

Tip: These indicators help confirm Orbit's operating mode, audio connection type, and Bluetooth codec.

Connected Successfully? One More Step!

Now check your TV audio settings to make sure sound is sent correctly to Orbit.

ADJUST TV AUDIO SETTINGS

Orbit Cannot Find or Connect to My Headphones / Speakers

Confirm pairing mode: Make sure your headphones or speakers are in Bluetooth pairing mode, not just powered on.
Disconnect other devices: Turn off Bluetooth on nearby phones, tablets, or computers that may automatically reconnect.
Search again: Press Orbit's magnifying glass button to refresh the list of available devices.
Move devices closer: Keep your headphones or speakers near Orbit during pairing.
Already connected but no sound? Check the TV audio output and audio format settings. For optical connections, try setting the TV's digital audio output to PCM.

Still Need Help?

Tell us your headphone or speaker brand and model, and whether Orbit can detect its Bluetooth name.

ASK A QUESTION