Roadtrip - How to Factory Reset/ Clear Pairing History – Avantree Support

Roadtrip Factory Reset

Factory Reset / Clear Pairing History

Clear saved Bluetooth connections and set up your Avantree Roadtrip again.

When Should I Reset the Roadtrip?

Resetting the Roadtrip erases its saved Bluetooth pairing history. This can help if the Roadtrip is having trouble connecting or reconnecting to your phone or another Bluetooth device.

Before You Reset

A factory reset clears the Roadtrip's saved Bluetooth connections. You will need to pair it with your device again afterward.

Open the Bluetooth settings on your phone, tablet, computer, or other connected device.
Find Avantree Roadtrip and select Forget, Remove, or Unpair.
Turn Bluetooth OFF on that device.
Keep other previously paired Bluetooth devices turned off or out of range during the reset and re-pairing process.

Remove Roadtrip from Your Bluetooth Device

In your device's Bluetooth settings, locate the Roadtrip and Unpair / Forget / Remove it.

After removing it, turn Bluetooth OFF on the device.

Put the Roadtrip into Pairing Mode

Power on the Roadtrip. Then press and hold the pairing button for about 2 seconds until the LED begins flashing RED and BLUE.

PAIRING MODE

RED and BLUE flashing

The Roadtrip is now in Bluetooth pairing mode.

Factory Reset the Roadtrip

While the Roadtrip is still in pairing mode, double-click the pairing button.

RESET CONFIRMATION

PINK LED flashes

You will also hear two beeps.

RESET COMPLETE

RED and BLUE flashing again

The Roadtrip has returned to pairing mode.

Reset successful: If you see the PINK LED and hear two beeps, the Roadtrip's Bluetooth pairing history has been cleared.

Pair the Roadtrip Again

Once the Roadtrip returns to RED and BLUE flashing, it is ready to pair again.

Turn Bluetooth back ON on your phone or other device.
Open the device's Bluetooth settings.
Select Avantree Roadtrip from the list of available Bluetooth devices.

Important: Prevent Automatic Reconnection

Bluetooth devices normally try to reconnect automatically to previously paired devices.

If the Roadtrip keeps connecting to the wrong device, temporarily turn Bluetooth OFF on nearby phones, tablets, computers, or other devices that were previously paired with it.

Still Need Help?

Contact Avantree Support and tell us:

The phone or Bluetooth device you're using with Roadtrip
What the Roadtrip LED shows when you try to reset it
Whether you see the PINK LED
Whether you hear the two confirmation beeps

Contact Avantree Support