How to Factory Reset/ Clear Pairing History of DG80P – Avantree Support

Before You Reset

Factory resetting DG80P will clear its previous Bluetooth pairing history. You will need to pair your Bluetooth headphones or speakers with DG80P again afterward.

Plug In DG80P

Make sure DG80P is plugged into a USB port and powered on.

Keep DG80P plugged in throughout the reset process.

Enter Bluetooth Pairing Mode

Press and hold the Multi-Function Button (MFB) for 2 seconds.

MFB

Press and Hold for 2 Seconds

Release the button when the LED begins flashing blue and white rapidly.

PAIRING MODE

Rapidly Flashing Blue / White

DG80P has entered Bluetooth pairing mode.

Clear the Pairing History

While DG80P is in pairing mode, press the MFB button twice.

MFB

Double-Click the MFB Button

Press twice to perform the factory reset.

RESET CONFIRMATION

Blue and White LEDs — 5 Seconds

The LED lights up blue and white for approximately 5 seconds to indicate the reset process.

Afterward, DG80P will automatically return to pairing mode.

✓

Factory Reset Complete!

DG80P has cleared its previous Bluetooth pairing history.

When the adapter automatically enters pairing mode again, the reset has been successful.

Next: Reconnect Your Bluetooth Headphones

DG80P is now ready to pair with your Bluetooth headphones or speakers again.

Put your headphones into pairing mode and follow the connection instructions.

RECONNECT YOUR HEADPHONES

Common Questions

How Do I Know the Factory Reset Was Successful?

After double-clicking the MFB button, the LED lights up blue and white for approximately 5 seconds.

DG80P then automatically enters Bluetooth pairing mode again. This indicates that the reset was successful.

Does Resetting DG80P Delete Previous Bluetooth Connections?

Yes. A factory reset clears DG80P's saved Bluetooth pairing history.

You will need to pair your headphones or speakers with DG80P again.

Why Isn't the LED Flashing Blue and White?

Make sure DG80P is plugged in and receiving USB power.

Press and hold the MFB button for 2 seconds until the LED alternates flashing blue and white rapidly.

Do not double-click the button until DG80P is in pairing mode.

Why Won't My Headphones Reconnect After Resetting?

A reset removes DG80P's previous Bluetooth pairing information.

Put your headphones or speakers into Bluetooth pairing mode again. Then allow them to reconnect to DG80P.

If your headphones automatically reconnect to a phone or computer, temporarily turn off Bluetooth on that device before trying again.

Still Need Help?

Tell us what happens when you press the MFB button, including the LED color or flashing pattern you see.

ASK A QUESTION