Skip to main content
Sign in
Deutsch Español Français Italiano 日本語（日本） 中文 (香港)
Category List
  • Updated

Medley Clear – How to Add a Second Pair of Headphones?

  • Updated

Medley Clear – How to Add a Second Pair of Headphones

Connect two pairs of Bluetooth headphones so two people can listen to the TV together.

Important

Connect the original NB18T headphones first. Do not pair the second headphones until the NB18T is fully connected.

Before You Start

Turn your TV off. Turn Bluetooth off on nearby phones, tablets, computers, and other devices previously paired with the second headphones. Keep the transmitter and both pairs of headphones close together.

Step 1 – Connect the Original NB18T

  1. Turn on the Medley Clear transmitter.
  2. Turn on the original NB18T headphones.
  3. Wait a few seconds for them to connect.

Solid BLUE = Original NB18T connected. Keep it on.

Step 2 – Put the Second Headphones in Pairing Mode

Put the second headphones into Bluetooth pairing mode.

Simply turning the headphones on is not enough.

The pairing button, holding time, and indicator vary by brand. Check the headphone manual or search:

[Brand] [Model] Bluetooth pairing mode

Search Google for Pairing Instructions →

Step 3 – Pair and Connect the Second Headphones

  1. Confirm that the second headphones are in Bluetooth pairing mode.
  2. Slide the transmitter power switch to the PAIR icon and hold it there for 2 seconds.
  3. Release the switch when the transmitter indicator flashes red and blue.
  4. Keep both devices close and wait without pressing any other buttons.

Transmitter flashing RED & BLUE = Ready to pair

Solid BLUE = Second headphones connected

Step 4 – Turn the TV Back On

Turn the TV back on, play something, and test both pairs of headphones.

How to Reconnect Both Pairs Next Time
  1. Turn on the Medley Clear transmitter.
  2. Turn on the original NB18T and wait for solid blue.
  3. Turn on the second headphones and wait 5–10 seconds.

Something Doesn't Look Right?

Original NB18T Is Not Connected

Reconnect the original NB18T first. Keep it on and wait for solid blue before pairing the second headphones.

Second Headphones Are On but Will Not Connect

Put the headphones into actual Bluetooth pairing mode. Check their manual for the correct button, holding time, and pairing indicator.

Both Devices Are in Pairing Mode but Will Not Connect
  1. Confirm that the original NB18T is connected.
  2. Keep the second headphones close to the transmitter.
  3. Turn Bluetooth off on nearby devices.
  4. Restart pairing on both devices.
  5. Wait without pressing any additional buttons.
There Is a Delay Between the Two Headphones

Different Bluetooth headphones can have different audio delays. Compatible low-latency headphones provide better synchronization.

Need More Medley Clear Help?

See all setup and troubleshooting guides for this product.

View Medley Clear Support

Still Need Help?

Contact the Avantree Support team for additional assistance.

Contact Avantree Support

Related to

Comments

0 comments

Related articles

Please sign in to leave a comment.