Medley Clear - How to Use the Headphones Independently with Another Device? – Avantree Support

Medley Clear – How to Use the NB18T with Another Device

Connect the NB18T headphones directly to a phone, tablet, computer, or another compatible Bluetooth audio device.

Important

Turn the Medley Clear transmitter off first. Otherwise, the NB18T may reconnect to the transmitter instead of pairing with your other device.

Step 1 – Turn Off the Transmitter

Switch the Medley Clear transmitter off and leave it off while connecting the NB18T to your phone, tablet, or computer.

Step 2 – Put the NB18T in Pairing Mode

Start with the NB18T turned off.
Slide and hold the headphone power switch toward PAIR.
Keep holding until the indicator flashes red and blue and you hear “Pairing.”

Flashing RED & BLUE + “PAIRING” = Ready to connect

Simply turning the headphones on is not enough. Keep holding the switch until pairing mode starts.

Step 3 – Connect from Your Device

Open Settings → Bluetooth on your device.
Make sure Bluetooth is on.
Select Avantree NB18T.
Wait for the connection to complete.

Solid BLUE + “CONNECTED” = Connection complete

Use the NB18T with the Medley Clear Again

Turn Bluetooth off on the phone, tablet, or computer.
Turn the NB18T off.
Turn the Medley Clear transmitter on.
Turn the NB18T on.
Keep them close and wait a few seconds for the indicator to turn solid blue.

Solid BLUE = Connected to the Medley Clear

Something Doesn't Look Right?

NB18T Turns On but Does Not Enter Pairing Mode

Start with the NB18T off. Slide and keep holding the switch toward PAIR. Do not release it when the headphones first turn on. Release it only after the indicator flashes red and blue and you hear “Pairing.”

Avantree NB18T Does Not Appear in the Bluetooth List

Confirm that the Medley Clear transmitter is off.
Confirm that the NB18T is flashing red and blue.
Keep the NB18T close to your device.
Turn Bluetooth off and back on, then search again.

NB18T Will Not Reconnect to the Medley Clear

Turn Bluetooth off on the other device.
Turn the NB18T off.
Turn the Medley Clear transmitter on.
Turn the NB18T on and keep it close.
Wait a few seconds for the indicator to turn solid blue.

Solid BLUE = Connected

Need More Medley Clear Help?

See all setup and troubleshooting guides for this product.

View Medley Clear Support

Still Need Help?

Contact the Avantree Support team for additional assistance.

Contact Avantree Support