AUTO POWER ON
CK11 – How to Use Auto Power ON
The CK11 motion sensor can wake the speakerphone automatically when you enter or move inside your car.
Important: Leave the CK11’s physical power switch set to ON. If you manually switch it to OFF, the motion sensor cannot wake the CK11 automatically.
Turn Auto Power ON
- Slide the CK11 power switch to ON.
- Leave the power switch in the ON position.
- When the CK11 detects motion, it should automatically power on.
- If your phone was paired previously, the CK11 should reconnect automatically.
When the connection is successful, you should hear: “Power on”, then “Connected.”
Turn Auto Power OFF
If you do not want the CK11 to wake automatically, slide the physical power switch to OFF. The motion sensor will no longer turn the CK11 on automatically.
CK11 Does Not Turn On Automatically?
- Make sure the physical power switch is still set to ON.
- Move or gently shake the CK11 to trigger the motion sensor.
- Wait a few seconds for it to wake.
- Check whether it reconnects to your previously paired phone.
Still Need Help?
Contact Avantree Support for additional assistance with your CK11.
Contact Avantree Support
Comments
0 comments
Related articles
Please sign in to leave a comment.