HT5009 Plus - Guide to Charging Your Headphones

The HT5009 Plus headphones give a low battery alert, and the LED turns red when battery is low. To recharge them, you can either place them on the charging dock or use the provided USB-C cable.

1. Charging Dock

• Connect the included USB-C cable to a USB adapter/port and plug it into the dock.
• The dock’s LED lights up red while charging and turns off when fully charged.
• Wireless charging works between the right side of the dock (R) and the right earcup (R). Make sure they are properly aligned.

2. USB-C Cable

• Connect the included USB-C cable to a USB adapter/port and plug it into the headphones' USB-C port.
• The red LED on the left earcup shows charging and turns off when fully charged.
• Charging Time: About 2.5 hours from empty to full.

💡Notes:

• First Charge: Fully charge the headphones before first use for optimal battery calibration. Avoid fully draining the battery before the initial charge.

• Auto Power-Off: The HT5009 Plus headphones automatically turn off while charging and won’t turn back on afterward, even if the switch is set to "ON." To power them on again, toggle the OFF/ON/PAIR switch from "OFF" to "ON."