Ensemble Pro - 工場出荷時リセット / Bluetoothペアリング履歴のクリア方法 – Avantree Support - Japanese

Ensemble Pro · Bluetooth Reset

Clear the Headphones' Bluetooth Pairing History

Use this reset if the Ensemble Pro headphones will not connect by Bluetooth, keep reconnecting to an old device, or you want to pair them with a different Bluetooth device.

When should I do this?

The headphones will not connect to your Bluetooth device.

The headphones keep connecting to a previously paired device.

You want to pair the headphones with a new Bluetooth device.

Important

This reset clears Bluetooth pairing only.

It does not clear the headphones' Auracast broadcast information used with the Ensemble Pro transmitter.

Reset the Headphones

Keep the headphones turned on while completing these steps.

Turn On the Headphones

Power on the Ensemble Pro headphones before starting the reset.

Press and Hold Volume + and Volume − Together

Press both volume buttons at the same time and keep holding them for 5 seconds.

+ + − Hold 5 seconds

Watch the Status Light

Release the buttons when the red and blue lights turn solid for about 2 seconds.

Reset confirmation When red and blue are solid at the same time, the light may look pink or purple. It stays solid for about 2 seconds.

Reset Complete

Bluetooth Pairing History Is Cleared

After the reset, the headphones return to Bluetooth pairing mode and are ready to pair with another Bluetooth device.

What Happens After the Reset?

Hold Volume + and Volume −
for 5 seconds

Bluetooth pairing
history is cleared

Headphones automatically enter
Bluetooth pairing mode

Using the Ensemble Pro Transmitter?

You normally do not need Bluetooth pairing for TV use.

When used with the Ensemble Pro transmitter, the headphones receive its Auracast broadcast. Clearing Bluetooth pairing history does not erase the Auracast connection information.

How do I manually enter Bluetooth pairing mode?

Make sure the headphones are turned on.

Press and hold the Play / Pause (MFB) button for 3 seconds.

Wait for the Status light to flash red and blue alternately . The headphones are now in Bluetooth pairing mode.

Open the Bluetooth settings on your phone, tablet, computer, or other Bluetooth device and select Ensemble Pro.

Reset completed, but Bluetooth still will not connect

Turn off Bluetooth on nearby phones, tablets, computers, or TVs that were previously paired with the headphones.
On the device you want to connect, remove or forget the old Ensemble Pro Bluetooth entry if it is still listed.
Turn Bluetooth off and back on on the device you want to connect.
With the headphones turned on, press and hold the Play / Pause (MFB) button for 3 seconds.
Wait for the Status light to flash red and blue alternately, then select Ensemble Pro from your device's Bluetooth menu.

Still Need Help?

Ask us a question about your Ensemble Pro and our support team will help you.

Ask a Question