ProLink - How to factory reset / clear pairing history? – Avantree Support

Reset your ProLink and start fresh

The ProLink system includes two devices: the DG60L USB transmitter and the AS70P wireless receiver. Each device has its own reset procedure. Follow the instructions below for the device you want to reset.

Reset the DG60L Transmitter USB transmitter connected to your computer or audio source

Plug In the DG60L

Make sure the DG60L transmitter is plugged into a powered USB port.

Hold the Multi-Function Button

Press and hold the Multi-Function Button (MFB) for 2 seconds, until the LED lights up blue and red simultaneously.

PRESS & HOLD MFB 2 SECONDS

Double-Click the MFB

Double-click the same button. The LED should turn solid blue and red together (appearing pink) for approximately 2 seconds.

DOUBLE-CLICK MFB CLICK × 2

Solid pink for 2 seconds

Blue and red LEDs are illuminated simultaneously.

Check for Pairing Mode

After the reset, the DG60L automatically enters Bluetooth pairing mode.

Flashing RED and BLUE alternately

The transmitter is ready to pair.

DG60L Reset Complete The transmitter is now in Bluetooth pairing mode.

Reset the AS70P Receiver Wireless receiver used with the ProLink system

Turn On the AS70P

Slide the AS70P power switch to the ON / Bluetooth position.

Press and Hold + and − Together

Press the Volume + and Volume − buttons at exactly the same time. Keep both buttons pressed for 5 seconds.

PRESS & HOLD BOTH BUTTONS TOGETHER

+ VOLUME +

AND

− VOLUME −

HOLD FOR 5 SECONDS Do not press one button first. Press both together and keep holding.

Look for the Pink Indicator

The LED will light up blue and red simultaneously, appearing pink, for approximately 2 seconds.

Solid pink for 2 seconds

The receiver has recognized the reset command.

Check for Pairing Mode

The AS70P automatically enters Bluetooth pairing mode after resetting.

Flashing RED and BLUE alternately

The receiver is ready to pair.

AS70P Reset Complete The receiver is now in Bluetooth pairing mode.

After Resetting

The reset device is ready for a new Bluetooth connection. Follow the ProLink Interactive Setup Guide to connect your devices again.

VIEW PROLINK SETUP GUIDE →

Still having trouble resetting?

Tell us whether you're resetting the DG60L transmitter or AS70P receiver, and describe what the LED does when you press the buttons.

ASK A QUESTION