How to Change the Earpads on Aria Series

Aria Series – How to Replace the Earpads

Follow these simple steps to remove your old earpads and install new ones.

Before You Start: Turn OFF your headphones and disconnect any charging cable. Have your replacement earpads ready.

Watch the Video Guide

Prefer written instructions? Follow the steps below.

Step 1 – Remove the Old Earpads

1. Hold one headphone earcup firmly.
2. Gently pull the edge of the earpad away from the plastic housing.
3. Continue around the edge to release the earpad from the plastic clips.
4. Remove the earpad completely.

Step 2 – Install the New Earpads

1. Position the new earpad so its shape matches the earcup.
2. Insert one section of the earpad edge under the plastic clips.
3. Continue pressing the edge into place, working all the way around the earcup.
4. Make sure the entire earpad edge is securely held by the clips.

Step 3 – Check the Earpads

1. Check that the earpad is evenly attached all the way around.
2. Gently press any loose edges back under the clips.
3. Repeat the same steps for the other earcup.

Something Doesn't Look Right?

If you have trouble removing or installing the earpads, contact Avantree Support. Tell us your headphone model and which part is not fitting.