Medley Air - How to Add a Second Pair of Headphones? – Avantree Support

START HERE

Medley Air – How to Add a Second Pair of Headphones

You can connect a second pair of Bluetooth headphones to your Medley Air.

Before You Start: Make sure the original Medley Air headphones are already connected. Keep them ON and connected while adding the second pair.

Step 1 – Put the Second Headphones in Pairing Mode

Put the second headphones into Bluetooth pairing mode.

Simply turning the headphones ON is not enough.

For Avantree headphones, you may see: Flashing RED & BLUE = Pairing Mode. For other brands, check the headphone manual for its pairing instructions.

Step 2 – Put the Transmitter in Pairing Mode

Find the “2” button on the back of the Medley Air transmitter. Press and hold it for 5 seconds.

“2” Flashing RED & BLUE = Searching for second headphones

Keep the second headphones close to the transmitter.

Step 3 – Wait for Connection

Do not press any other buttons. Wait for the second headphones to connect.

“2” Solid BLUE = Second headphones connected

Test the sound through both pairs of headphones.

Step 4 – Lock the Second Headphones

Once the second headphones are connected and working, press and hold the “2” button for 8 seconds.

“2” Solid PINK for about 5 seconds = Locked

The indicator then returns to the connected state. The second headphones are now connected and locked.

Using Both Headphones Next Time

Turn ON the Medley Air transmitter.
Turn ON the original headphones and wait for “1” Solid BLUE.
Turn ON the second headphones and wait for “2” Solid BLUE.

Something Doesn’t Look Right?

Second Headphones Won’t Connect

Make sure the second headphones are in actual pairing mode, not simply turned ON. Keep them close to the transmitter and confirm that “2” is flashing RED & BLUE.

Second Headphones Keep Connecting to a Phone

Turn Bluetooth OFF on nearby phones, tablets, or computers that previously used the second headphones. Put the headphones back into pairing mode and try again.

“2” Is Solid BLUE but There Is No Sound

Solid BLUE means the second headphones are connected. Turn up their volume, make sure they are not muted, then test again. Do not pair them again while “2” is Solid BLUE.

Second Headphones Do Not Reconnect Next Time

Turn ON the original headphones first and wait for “1” Solid BLUE. Then turn ON the second headphones. If “2” does not become Solid BLUE, press the “2” button once and wait for reconnection. If needed, pair the headphones again and complete Step 4 to lock them.

Need More Medley Air Help?

See all setup and troubleshooting guides for this product.

View Medley Air Support

Still Need Help?

Contact Avantree Support and tell us what the “1” and “2” indicators are showing.

Contact Avantree Support