Avantree Repose Use with Avantree Transmitter

You can purchase an Avantree transmitter to work with the Repose earbuds to watch TV without lip-sync delay. E.g. Avantree Orbit, Oasis Plus, Audikast Plus etc.

Below is a set of simplified instructions on how to connect your Repose earbuds to a non-Bluetooth TV.

Step 1: Connect your Transmitter to your TV.

Most TVs nowadays offer at least one of the options below; you may use whichever one your TV has. We recommend using Optical if your TV has it.

Step 2: Connect (Pair) your Headphones/Speaker/Receiver to the Transmitter.

Enter your Transmitter into pairing mode (please refer to your transmitter’s user manual if you’re not sure how).

Then, enter the Repose earbuds into pairing mode. The indicator will flash RED & BLUE. Put the earbuds and the transmitter close together, and they should connect.

Step 3: Adjust Sound Settings on your TV.

If using Optical, make sure that the audio output on your TV is set to PCM or Stereo. (If using AUX or RCA, you shouldn’t need to change any settings).

How to adjust the sound settings on your TV

And you should be good to go!