Audition 3 - Guide to Charging Your Headphones

The Audition 3 AS19 headphones give a low battery alert, and the LED turns red when battery is low. To recharge them, you can either place them on the charging dock or use the provided USB-C cable.

1. Charging Dock

• Plug the included charging cable into the dock's USB-C port, then connect it to a USB wall charger.

(⚠️Please avoid using a TV or computer USB port, or a power bank, as they may not provide sufficient power.)

• The dock’s LED lights up red while charging and turns off when fully charged.
• Wireless charging works between the right side of the dock (R) and the right earcup (R). Make sure they are properly aligned.

2. USB-C Cable

• Plug the included charging cable into the headphones' USB-C port, then connect it to a USB wall charger. (⚠️Avoid using a TV or computer USB port.)
• The red LED on the left earcup shows charging and turns off when fully charged.
• Charging Time: About 2.5 hours from empty to full.

💡Notes:

• First Charge: Fully charge the headphones before first use for optimal battery calibration. Avoid fully draining the battery before the initial charge.

• Auto Power-Off: The Audition 3 AS19 headphones automatically turn off while charging and won’t turn back on afterward, even if the switch is set to "ON." To power them on again, toggle the OFF/ON/PAIR switch from "OFF" to "ON."