How to Install the AS9P Ear Cushions - Auditon series

AS9P – How to Install the Ear Cushions

Replacing your AS9P ear cushions? Follow these simple steps to install them correctly.

Video Guide – Watch the Installation

Watch the video below to see how to install the ear cushions.

Watch on YouTube →

Before You Start: Turn OFF your headphones and check that you have the correct replacement ear cushions.

Step 1 – Find the Left and Right Ear Cushions

1. Find the L and R markings on your headphones and ear cushions.
2. Match the L (Left) cushion with the L (Left) headphone.
3. Match the R (Right) cushion with the R (Right) headphone.

Step 2 – Attach the Ear Cushion

1. Hold the ear cushion against the matching headphone.
2. Start at one section of the cushion's edge.
3. Gently pinch and press the cushion's outer edge into place around the headphone.
4. Continue around the edge, one small section at a time, until the entire cushion is secure.

Step 3 – Adjust the Ear Cushion

1. Check that the cushion is attached all the way around.
2. Gently rotate and adjust the cushion until it sits flat.
3. Position the cushion's seam at the bottom center of the headphone.

Something Doesn't Look Right?

If your ear cushions will not attach securely, contact Avantree Support. You can send us a photo of the cushions and headphones so we can help.