Set up 2: Connecting the earbuds to the transmitter

1. Powering up transmitter 

Power the transmitter using the USB cable provided. Connect it to a TV USB port (TV must be ON to provide power) or any other 5V/500mA-2A rated USB charger (e.g. your phone charger should work).

Note: Contact us at support@avantree.com for a FREE USB wall charger (for US / UK / EU) if you need one.

2. Turn on both the transmitter and earbuds

Turn on the transmitter – Slide the ON/OFF switch to ON, all LED indicators will light up for 2 seconds.

Turn on the earbuds:

With the charging case -  

Open the charging case, the earbuds will turn on automatically, You will see both of the earbuds flash Blue once. Wait about 3s, then the LED indicator ② will flashes Red and Blue.

Without the charging case - 

Press and hold the Multi-Function button for about 2 seconds to turn the earbuds on. You'll see them flash Blue and hear "power on". Wait about 2-3 seconds, then the LED indicator will start flashing Red and Blue. That means it is in pairing mode.

Keep the transmitter and earbuds together, give them a few seconds, once connected,  the LED indicator ② on the earbuds will be OFF and the   next to   on the transmitter turn Solid Blue, you hear “Connected”.