Pebble – Power & Charging Related – Avantree Support

START HERE

Pebble – Power & Charging

The charging case charges your Pebble earbuds.

For normal use: Charge the case, place the earbuds inside, and the earbuds charge automatically.

Charge the Charging Case

Connect the charging cable to the Pebble charging case.
Connect the other end to a 5V / 0.5–2A USB power source.

Charging time: The case takes about 3 hours to fully charge.

Pebble charging case and earbuds charging

Charge the Earbuds

Place both Pebble earbuds securely inside the charging case.

Solid RED = Charging

Light OFF = Fully charged

Charging time: The earbuds take about 2 hours to fully charge.

Something Doesn’t Look Right?

Earbud Does Not Show a RED Charging Light

Remove the earbud from the case.
Place it back in securely.
Check for the solid red charging light.

Make sure the charging case has power. If the earbuds still do not charge, try a different compatible charging cable and USB power source, then test again.

Only One Earbud Is Charging

Remove the earbud that is not charging and place it back in the case. Make sure it is sitting correctly. If needed, check that the charging contacts on the earbud and inside the case are clean and dry.

Need More Pebble Help?

See all setup and troubleshooting guides for this product.

View Pebble Support

Still Need Help?

Contact Avantree Support for additional assistance.

Contact Avantree Support