Connect the Bluetooth Headphones/ Speaker to DG60P

NOTE 1.1：

1.  It is an audio adapter and recognized as a USB sound card / USB speaker when plugged in. No Bluetooth icon will appear on PC.
2. The pairing / connection via Bluetooth is between the DG60 and your headphones / speaker, not the PC.

Step 1: Plug the DG60P In.

Step 2: Get the DG60 into Pairing Mode.

1st-Time Use: It'll automatically enter pairing mode. The LED indicator will rapidly flash BLUE & WHITE.
Note 1.2: Non-1st Time Use: Press & Hold the MFB button on DG60 until the LED indicator starts flashing BLUE & WHITE rapidly.

Step 3: Put your Headphones/Speakers into Bluetooth Pairing Mode.

Headphone / Speaker 1st-Time Use: The Headphone/Speaker should enter pairing mode automatically when powered on.

Note 1.3: Non-1st-Time Use: Merely powering on WILL NOT get it into pairing mode, you'll need to do so manually. Please either refer to the brand list below or refer to your Headphone/Speaker's user manual. You also can search on Google. E.g. “Bose QC35 Bluetooth Pairing Mode”

Airpods, Beats, Bose, SONY, JBL, Jabra, ...

Note 1.4: It is important to turn your cellphone, PC or any other previously paired-with devices' Bluetooth function off to avoid interference.

With both devices in pairing mode, give them a few seconds. Once connected, the flashing on the DG60 will slow down.

If you still can't get DG60 to pair with your bluetooth headphones/speakers, please try to Factory reset DG60 and your devices and try again.