How to get Pebble into Bluetooth Pairing Mode – Avantree Support

Pebble – Bluetooth Pairing Mode

Follow these steps to put your Pebble into Bluetooth pairing mode and connect it to your device.

What should I see?

When the Pebble is ready to pair, the LED will flash Red and Blue.

Flashing Red and Blue = Ready to Pair

Step 1 – Take the Pebble Out of the Charging Case

Take the Pebble earbuds out of the charging case.

✓ The Pebble should automatically turn on and enter Bluetooth pairing mode.

Step 2 – Check the LED

Check the LED on the Pebble.

Flashing Red and Blue – Pebble is in pairing mode and ready to connect.

If the LED is flashing Red and Blue, continue to Step 3.

Step 3 – Connect the Pebble

✓ Connected successfully?
Your Pebble is now ready to use.

Not Seeing the Red and Blue Flashing LED?

Your Pebble may have automatically reconnected to a device that it was previously paired with.

Important: Turn OFF Bluetooth on the previously connected device before trying again.

Find the phone, tablet, computer, or other device that was previously connected to the Pebble.
Turn OFF Bluetooth on that device.
Put the Pebble back into the charging case.
Take the Pebble out of the charging case again.
Check the LED again.

Check the Result

Flashing Red and Blue = Pairing Mode

Once the LED is flashing Red and Blue, return to the Bluetooth settings on the device you want to use and select Avantree Pebble.

Quick Pairing Check

Take Pebble out of the charging case

↓

Is the LED flashing Red and Blue?

↓

YES
Select Avantree Pebble in your Bluetooth settings.

NO
Turn OFF Bluetooth on the previously connected device, then try again.

Still Need Help?

If the Pebble still does not enter pairing mode or does not connect, Avantree Support can help.