Set Up 2: Connect Bluetooth Headphones / Speakers to Oasis Plus

Your Oasis Plus is connected to your TV. Now follow these 4 simple steps to pair your Bluetooth headphones or speakers.

Click Next after completing each step.

1 Power On

2 Oasis Plus Pairing

3 Headphones Pairing

4 Connected

STEP 1 OF 4

Power Everything On

Before pairing, make sure both devices are switched on and ready.

Turn on your Oasis Plus.
Turn on your Bluetooth headphones or speakers.
Keep both devices close together during pairing.

First-Time Setup: Oasis Plus automatically enters Bluetooth pairing mode when used for the first time.

Step 1 of 4 Next →

STEP 2 OF 4

Put Oasis Plus into Pairing Mode

For the first connection, Oasis Plus should enter pairing mode automatically.

If you have used Oasis Plus before, press and hold the Bluetooth Pairing button until the TX indicator flashes green and white alternately.

Press and hold the Bluetooth Pairing button

Correct Pairing Indicator

Flashing Green / White means Oasis Plus is ready to pair.

Important: Continue only after the TX indicator begins flashing green and white alternately.

← Back Step 2 of 4 Next →

STEP 3 OF 4

Put Your Headphones or Speakers into Pairing Mode

Now activate Bluetooth pairing mode on your headphones or speakers.

Follow the pairing instructions for your headphone or speaker model.
Look for the device's pairing indicator. Many Bluetooth headphones flash red and blue alternately.
Keep your headphones or speakers close to Oasis Plus.

Important: Simply turning on your headphones does not always activate pairing mode. Make sure they are specifically in PAIRING MODE.

Already Connected to Your Phone? Temporarily turn off Bluetooth on your phone or disconnect the headphones from it so they can pair with Oasis Plus.

Smart TV Pairing Request: If your TV asks to pair with your headphones or Oasis Plus, select DENY or CANCEL. Your headphones should pair directly with Oasis Plus, not with the TV.

← Back Step 3 of 4 Next →

STEP 4 OF 4

Wait for the Devices to Connect

Keep Oasis Plus and your Bluetooth headphones or speakers close together.

Wait approximately 5–10 seconds for them to connect.

Successful Connection Indicators

TX Solid White

A Solid White

Both the TX and A indicators should turn solid white.

Pairing Complete!

Your Bluetooth headphones or speakers are now connected to Oasis Plus.

Next Step: If the devices are connected but you cannot hear TV audio, check your TV's audio output settings.

NEXT: ADJUST TV AUDIO SETTINGS →

← Back Step 4 of 4 Start Over

Common Questions

My Headphones Are Not Connecting to Oasis Plus

The most common reason is that the headphones are not properly in pairing mode.

Check that Oasis Plus's TX indicator is flashing green and white alternately, then activate pairing mode on your headphones.

If your headphones are connected to another device, such as a phone, disconnect them first.

The TX Indicator Is Not Flashing Green and White

Press and hold the Bluetooth Pairing button on Oasis Plus until the TX indicator begins flashing green and white alternately.

This indicates that Oasis Plus is ready to discover a Bluetooth device.

My Smart TV Keeps Asking to Connect to My Headphones

Some smart TVs automatically search for nearby Bluetooth devices.

If your TV displays a Bluetooth pairing request for your headphones or Oasis Plus, choose DENY or CANCEL.

Pair the headphones directly with Oasis Plus instead.

TX and A Are Solid White, but I Cannot Hear TV Sound

Solid white TX and A indicators mean the Bluetooth connection has been established.

If you still cannot hear audio, check that your TV is sending sound through the output connected to Oasis Plus.

For optical connections, make sure the TV's digital audio output format is set to PCM.

Can I Connect a Second Pair of Bluetooth Headphones?

Yes. Oasis Plus supports connecting two Bluetooth headphones simultaneously.

Follow the separate instructions for adding a second pair.

View: Adding a Second Pair of Headphones

Still Need Help?

Tell us your headphone or speaker brand and model, what the Oasis Plus TX indicator is doing, and whether the A indicator turns solid white.

ASK A QUESTION