How to Group Multiple AuraClips with Oasis Aura?

Grouping lets you change the Oasis Aura’s broadcast name and passcode, then synchronize these settings with multiple connected AuraClips or other supported Avantree/Venucast receivers.

This one-time setup is ideal for churches, classrooms, tours, events, and other group-listening environments.

How to Set Up a Group

1. Turn on AuraClips and connect them to the Oasis Aura broadcast.
2. Connect the Oasis Aura to your computer using a USB data cable.
3. Open the Avantree Firmware Updater and select Advanced.
4. Change the Broadcast Name, Encryption, or Passcode as needed.
5. Check both options:
   • Synchronize to supported Avantree Rx
   • Require Rx operation

6. Click Click to apply settings. And click Confirm.

   

7. When the receiver indicators flash, press the CHANNEL button once on each Aura Clip. The indicator will turn solid orange when the connection is successful.

The AuraClips are now grouped with the Oasis Aura and will use its updated broadcast settings.

If you later change the broadcast name, encryption, or passcode, repeat the grouping process.