Aria Aura - How to Replace the Headphone Earpads and Headband Cushion – Avantree Support

Cushion Replacement Guide

Replace the Earpads & Headband Cushion

Follow the steps below to remove the worn cushions and install the replacements securely.

Find the compatible earpads or headband cushion before starting.

Gently peel the earpad away from the earcup. Some force may be needed to release it.

Position the new earpad with the grooves around the earcup.

Press firmly around the edge until the earpad clicks securely into place.

Watch the Earpad Replacement Video

Open the video for a closer look at how the earpad releases and attaches.

Use a screwdriver to slightly widen the joint, then gently pull the cushion away from the headband.

Line up the new cushion with the attachment points on the headband.

Press it into place until secure, then adjust it for a comfortable fit.

Use this photo to identify the cushion attachment area.

Widen the joint only slightly. Avoid forcing or bending the headband.

Final Check

Make sure each cushion is firmly attached with no loose or lifted edges before using the headphones.

Tell us which part you are replacing and where you are having difficulty.