START HERE
VoxAmp Lite – How to Fix No Sound
Is your VoxAmp Lite turned on but not producing sound? Follow these steps to get it working again.
Step 1 – Check the Power
- Make sure your VoxAmp Lite is turned ON.
- Check whether the amplifier's power indicator is on.
- If it does not turn on, charge the amplifier and try again.
Step 2 – Turn Up the Volume
- Speak into the connected microphone or play audio from your connected device.
- Slowly increase the amplifier volume until you hear sound.
Important: If you hear a loud whistling noise, lower the volume and move the microphone farther away from the speaker.
Step 3 – Check the Correct Mode
The VoxAmp Lite has 3 modes. Make sure you have selected the mode you want to use.
Option A – Amplifier Mode (Microphone)
- Switch the VoxAmp Lite to Amplifier Mode.
- Make sure the microphone is properly connected.
- Speak into the microphone and increase the volume if needed.
Option B – Bluetooth Mode (Phone or Tablet)
- Switch the VoxAmp Lite to Bluetooth Mode.
- Turn on Bluetooth on your phone or tablet.
- Select the VoxAmp Lite from the Bluetooth device list and connect.
- Play audio and check whether sound comes from the speaker.
Option C – USB Drive Mode (Music Files)
- Insert a USB drive containing supported music files into the VoxAmp Lite.
- Switch to USB Drive Mode.
- Play a music file and check the sound.
Note: USB Drive Mode requires a USB drive with compatible music files.
Step 4 – Restart the Amplifier
- Turn OFF the VoxAmp Lite.
- Wait about 10 seconds.
- Turn the amplifier ON again.
- Select the correct mode again.
- Test the sound.
Still No Sound?
Contact Avantree Support. Tell us whether the amplifier turns on, which mode you are using, and which steps you have tried.
Contact Avantree Support
Comments
0 comments
Related articles
Please sign in to leave a comment.