Aria 3 - Connect Two Devices – Avantree Support

Bluetooth Multipoint

Connect Two Devices

Aria 3 can stay connected to two Bluetooth devices at the same time.

Device 1 For example: Phone

Device 2 For example: Laptop

Connect Your First Device

Turn On Bluetooth

Open the Bluetooth settings on your first device and turn Bluetooth on.

Put Aria 3 Into Pairing Mode

Slide and hold the power switch toward PAIR until the LED flashes red and blue.

Flashing Red & Blue = Pairing Mode

Select “Aria 3”

Select Aria 3 from the Bluetooth device list.

Solid Blue = Connected

Connect Your Second Device

Repeat the same three steps on your second device. Before selecting Aria 3 on the second device, put the headphones back into pairing mode.

Most Common Issue

If the second device cannot find Aria 3, the headphones may not have been put back into pairing mode. Slide and hold the power switch toward PAIR again and wait for the LED to flash red and blue.

How Multipoint Helps

You can stay connected to your phone and laptop at the same time. For example, listen to music from your laptop while remaining connected to your phone for calls.

Still Not Connecting?

Restart both Bluetooth devices and your Aria 3 headphones.
Open Bluetooth settings on each device and forget or remove “Aria 3”.
Pair the first device again.
Put Aria 3 back into pairing mode, then pair the second device.

Still Need Help?

Tell us which device connects successfully and which device is having trouble.

Ask a Question