How to Factory Reset/Clear Pairing History of Audikast 4860 – Avantree Support

FACTORY RESET

Audikast 4860 – Factory Reset / Clear Pairing History

Reset the transmitter and speaker separately to clear their saved Bluetooth connections.

Important: Complete both resets before pairing the transmitter and speaker again.

Turn on the transmitter.
Press and hold the Headphone 1 and Headphone 2 buttons together for 7 seconds.
Keep holding until both Bluetooth indicators turn pink.

PINK for 2 seconds = Transmitter pairing history cleared.

Flashing RED and BLUE = Transmitter is ready to pair.

Turn on the speaker.
Make sure the speaker is in Bluetooth mode.
Press and hold the ⏮ Previous Track and ⏭ Next Track buttons together for 7 seconds.
Release the buttons when the screen displays “Reset.”

“Reset” on the screen = Speaker Bluetooth pairing history cleared.
The speaker then enters connecting mode automatically.

Keep the transmitter and speaker close together, then pair the speaker with the transmitter again.

Still Need Help?

Contact Avantree Support if the transmitter and speaker do not reconnect after resetting.