How to PAIR, CONNECT and LOCK the speaker with the transmitter in Audikast 4860 – Avantree Support

PAIR AND LOCK

Audikast 4860 – Pair, Connect and Lock the Speaker

Reconnect the speaker and transmitter if they no longer connect automatically.

The transmitter and speaker are factory paired and locked. Normally, turn on both devices and wait for them to reconnect. Use the steps below only if they do not connect.

Step 1 – Put the Transmitter in Pairing Mode

Connect the transmitter to power and turn it on.
Press and hold the transmitter’s Bluetooth button until its Bluetooth indicator flashes.

Flashing RED and BLUE = Transmitter pairing mode.

Step 2 – Put the Speaker in Pairing Mode

Turn on the speaker by rotating its volume knob clockwise.
Press and hold the speaker’s Bluetooth button for 2 seconds.

“Bluetooth mode, pairing” on the speaker screen = Speaker pairing mode.

Step 3 – Wait for Them to Connect

Keep the speaker and transmitter close together while they connect.

Solid BLUE Bluetooth indicator and LL indicator = Connected.

The speaker screen shows “Connected” or “Music Playing.”

Step 4 – Lock the Connection

After the speaker and transmitter connect, press and hold the transmitter’s Bluetooth button for about 10 seconds.

PINK for a few seconds = Connection locked.
The speaker and transmitter should now reconnect automatically when both are turned on.

Still Need Help?

Contact Avantree Support if the speaker and transmitter still do not connect.

Contact Avantree Support