Sara
- Total activity 577
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 252
Articles
Recent activity by Sara-
How to connect PHILIPS Headphones to Avantree transmitters and dongles?
Before pairing, please note that most Philips products currently do NOT support aptX-Low Latency codec, hence there will be lip-sync delays when used to watch TV/Video. You may utilize an aptX-LL B...
-
Oasis Plus 2 – Factory Reset / Clear Pairing History
Conducting a factory reset on the Oasis Plus 2 will clear all past pairing data and restore the product's settings to default. You may want to reset it if you have trouble pairing it with your head...
-
General Bluetooth Information
1. Bluetooth by nature is a short-range wireless technology.Bluetooth was initially made for wireless headsets, hence its “range” was never meant to be anything more than the length of a typical b...
-
How to Factory Reset/Clear Pairing History of the Oasis
Before doing anything, please note that the TX mode and the RX mode reset together; in other words, resetting in either mode will result in the other mode to also getting resetted. Step 1: Power on...
-
AS70P - How to factory reset / clear pairing history?
You may want to reset the AS70P if you have trouble pairing it with your devices. Step 1: Switch the AS70P on. Step 2: Press and hold both volume plus and minus buttons for 5 seconds till the LED i...
-
NVIDIA SHIELD TV No Sound
Step 1: Click the MENU button on your Nvidia TV remote Step 2: Scroll down and select "Device Preferences." Step 3: Scroll down and Select "Display & Sound." Step 4: Scroll down and Go into "A...
-
How to use SoundJet R2 with PC
SoundJet R2 suppots USB input, you can use it with PC for audio and calling. 1. Plug SoundJet R2 with PC'S USB port. 2. Get your bluetooth headpone pairing with SoundJet R2. 3. Choose "Avantree Sou...
-
Audikast - How to Factory Reset/Clear Pairing History?
Executing a factory reset on the Audikast will eliminate its pairing history. Please adhere to the following steps to reset the device. Step 1: Power on the Audikast. Connect the Audikast to a powe...
-
How to Charge - Cyclone
If you can hear the speaker beeping or see the LED blinking RED, you will need to charge your speaker. Instructions: Insert the micro USB (smaller) end into the charging port on the speaker (you wi...
-
How to use Micro SD Card Mode? - Cyclone
1. Turn on the Cyclone 2. Open the lid at the bottom of the Cyclone and insert SD card.It will automatically switch to the SD card mode. 3. Press the play button to Play/pause Long press the”+” ...