Audikast 4HA - Rename and Passcode Guide – Avantree Support

Want to rename your Audikast 4HA broadcast or add a passcode?

First update the Audikast 4HA using the DFU tool. Once the update is complete, you can change the broadcast name, passcode, and default volume settings.

Complete the firmware update first.

The broadcast name and encryption settings become available after the firmware update is successfully completed.

Before You Start

✓

Download and open the DFU tool on your computer.

✓

Use a USB data cable, not a charge-only cable.

✓

Plug the Audikast 4HA directly into your Windows PC or Mac.

✓

Make sure the Audikast 4HA is powered ON.

Firmware Update

Update the Audikast 4HA

Keep the transmitter connected to your computer during the update.

Connect Audikast 4HA

Connect it directly to your computer using a USB data cable and power it on.

Open the DFU Tool

Launch the installed DFU updater on your Windows PC or Mac.

Load the Firmware

Load the Audikast 4HA firmware file, then click Run / Start.

Wait for Completion

Keep the Audikast 4HA connected until the firmware update finishes.

Once the firmware update is complete, go to Settings.

Broadcast Name

Change the name listeners see when searching for the Auracast broadcast.

Encryption / Passcode

Select the encryption option to configure a protected broadcast and passcode.

Default Volume

Adjust the default volume setting as needed.

Settings Screen Reference

Use this screen to locate the broadcast name and encryption options.

Audikast 4HA settings screen showing broadcast name and encryption options

DFU Tool Not Detecting the Audikast 4HA?

Check these first:

USB cable: Make sure it supports data transfer, not charging only.

USB port: Try another USB port on your computer.

DFU tool: Make sure the updater was installed correctly.

Firmware: Confirm that you selected the correct firmware file.

Still not detected?

Try another USB data cable first. If that does not work, restart your computer and try again. You can also test the update on another Windows PC or Mac.

Still having trouble?

Tell us whether you're using Windows or Mac and what happens when you click Run / Start in the DFU tool.

ASK A QUESTION