Slumber Mini - How to Remove, Wash, and Reinsert the Cover Correctly? – Avantree Support

START HERE

Slumber Mini – How to Remove, Wash, and Reinsert the Cover

Follow these steps to remove, wash, dry, and reinstall the fabric cover correctly.

⚠️ Important: Remove the speaker from the fabric cover before washing. Do not wash the speaker or electronic parts.

Step 1 – Remove the Speaker

Make sure the Slumber Mini is not in use. Carefully open the fabric cover and gently slide the speaker unit out. Do not pull or force it.

Only the empty fabric cover should be washed.

Step 2 – Wash and Dry the Fabric Cover

The empty fabric cover can be hand washed or machine washed. After washing, allow it to dry completely before putting the speaker back inside.

⚠️ Important: Do not put the speaker unit in water or in the washing machine, and do not reinsert it while the cover is wet or damp.

Step 3 – Put the Speaker Back Inside

Once the cover is completely dry, gently slide the speaker unit back inside.

🔊 Sound holes facing UP = Correct

The side with the sound holes must face UP toward you. This helps maintain proper sound output and comfortable listening.

Slumber Mini speaker with arrow showing the sound-hole side facing up

Step 4 – Test the Slumber Mini

Connect the Slumber Mini to your audio device.
Play some audio.
Check that the sound is clear and at its normal volume.

Sound normal? The speaker has been reinserted correctly.

Something Doesn't Look Right?

Sound Is Quieter After Reinstalling the Cover?

Check the speaker direction first.

🔊 Sound holes must face UP.

If the speaker is facing the wrong way, remove it, turn it over, reinsert it, and test the sound again.

Cover Is Still Damp?

Do not put the speaker back inside yet. Allow the cover to dry completely first.

Speaker Is Difficult to Put Back In?

Do not force it. Gently straighten the fabric and slowly slide the speaker into position. Before finishing, make sure the sound holes face UP.

Need More Slumber Mini Help?

Browse more Slumber Mini setup and troubleshooting guides.

View Slumber Mini Guides

Still Need Help?

If the Slumber Mini does not sound normal after reinstalling the cover, contact Avantree Support.

Contact Avantree Support