Duet – How to Replace the Headphone Earpads and Headband Cushion – Avantree Support

Cushion Replacement Guide

Replace the Earpads & Headband Cushion

Follow the steps below to remove the worn parts and install the replacements securely.

Choose the part you need.

Gently peel the earpad away from the earcup. Some force may be needed to release it.

Position the new earpad evenly in the grooves around the earcup.

Press firmly around the edge until the earpad clicks into place.

Watch the Earpad Replacement Video

Open the video for a closer look at how the earpad releases and fits back into the earcup.

Be gentle when opening the attachment joint.

Use a screwdriver to carefully widen the cushion joint just enough to release it.

Gently pull the cushion away from the headband.

Use this photo to identify the cushion attachment area after removal.

The photo shows the cushion removed from the headband and the attachment area underneath.

Use only light pressure.

Widen the joint only enough to release or attach the cushion. Avoid forcing or bending the headband.

Position the new cushion over the attachment points on the headband.

Press firmly until the cushion is securely attached.

Make sure the cushion is secure, then adjust it for comfort.

Final Check

Make sure the earpads and headband cushion are firmly secured with no loose or lifted edges.

Tell us which part you are replacing and where you are having difficulty.