HT5009 Plus - How to Pair, Connect, and Lock the Headphones to the Transmitter?

If your HT5009P headphones and transmitter fail to reconnect automatically, you can manually pair and lock them again.

Here's how:

1. Enter pairing mode on both the transmitter and the headphones.

1️⃣ Slide the power switch to the PAIR position (all the way forward). You’ll see the LED indicator flashing red and blue alternately, confirming the headphones are ready to pair.

2️⃣ Press and hold Button “🎧1” on the transmitter for about 5 seconds. The “🎧1” indicator will begin to flash green and white, indicating it is searching for and attempting to pair with the headphones.

2. Wait for them to connect.
3. Lock the headphones to the transmitter.
1️⃣ Press and hold Button “🎧1” again, but this time for 8 to 10 seconds. 

2️⃣ Release the button once 🎧1 shows a solid white and green light. Once locked, the headphones will automatically connect to the transmitter each time they are powered on.

💡Tips:

• For detailed button functions, see: HT5009 Plus – Buttons, Indicators & Function Table.

• Need a visual guide? Check out our Interactive Setup Guide.

• Turn off Bluetooth on nearby devices (TVs, phones, computers, speakers) to avoid connection interference.