Part 2. Connect the Wireless Headphone and Transmitter Base

After the transmitter is connected to a power source in Part1, you will need to connect the headphones to the transmitter. The Headphones and the transmitter base in this set are "Factory Locked", so you don't need to manually pair them each time. All you need to do is to turn them on and they should automatically connect within 2-5 secs.

Step 1. Make sure the Transmitter is powered on. Just slide the Power Switch on the Transmitter to the "ON" position as the following:

Step 2. Power the headphones on. Slide the Headphone Power Switch to the middle "ON" position and wait for 2-5 secs. They should automatically connect to each other, you can see solid blue light on the headphone once they are connected.