Keywords: Audition Procast, AS9PA, use with Bluetooth TV, Bluetooth enabled
Before you start pairing operation, please check if your TV is Bluetooth-enabled, otherwise you will need to get a Bluetooth transmitter to work with your headphones if your TV is not Bluetooth-enabled or your TV is Bluetooth-enabled smart TV but you prefer no audio delay experience (most TV native Bluetooth does not support low latency and you will still experience 200ms delay).
1. Access TV's Bluetooth option and choose pair device
Please follow your TV’s manual guide to check how to access its Bluetooth option. Some TV’s manual listed on their official site.
Samsung Bluetooth TV: https://www.samsung.com/us/support/answer/ANS00049994/
LG Bluetooth TV: http://www.lg.com/uk/support/solutions/tv/smart-tv/headphones
2. Enter into Avantree Audition Procast Bluetooth PAIRING MODE
From Power ON , slide the Power Switch to position and hold for 3s until the LED flashes BLUE and RED alternately. (DO NOT slide the power switch from to directly)
*Note: If your TV cannot find your headphone, it is most likely that your headphone was paired with other device and does not stay in pairing / discoverable mode when you try to pair. You need to turn off the Bluetooth function from other devices first and make sure the headphone is flashing blue and red alternately when pair with your TV. **
Back to your TV menu, you will see the Bluetooth devices listed on your TV's on-screen display, please select “Avantree Audition Procast” → Select “Pair and connect”
Now, Avantree Audition Procast is connected to your TV!
NOTE: If no sound, you might need to check --
1) make sure your TV audio is set to Bluetooth headphone as output;
2) adjust the headphone volume by clicking or pressing the volume button.
Any questions please feel free to contact email@example.com