TC417 - Guide - How to work with your wired speaker/sound bar?

Follow

Turn on the TC417: Press and hold MFB button for 3 seconds until you see the BLUE.

______1.gif

Set the TC417 to RX mode: Slide TX/RX switch to “RX” position.

RC--TC--RX.gif

Enter the TC417 into PAIRING MODE: Upon first use, the TC417 will enter pairing mode automatically. The LED indicator will flash BLUE. Otherwise, press and hold PAIR button for 2 seconds to enter into pairing mode.

__PAIR_____2.gif

Connect the TC417 to Bluetooth audio source: Activate Bluetooth on your Bluetooth audio source and search for “Avantree TC417” - tap to connect. Once connected, LED on the TC417 will turn SOLID BLUE.

_____Avantree-TC417_-_______.gifLED______RX_.jpg

 

Plug the TC417 to wired speaker or sound bar:  

Optical audio input, refer to Option A. If no sound, ensure AUX / SPDIF (Optical) Switch on TC417 is set to “SPDIF” position.

SPDIF___SPDIF_-2.jpg

AUX 3.5mm input, refer to Option B. If no sound, ensure AUX / SPDIF (Optical) Switch on TC417 is set to “AUX” position.

SPDIF___AUX__.gif

RCA audio input, refer to Option C. If no sound, ensure AUX / SPDIF (Optical) Switch on TC417 is set to “AUX” position.

SPDIF___AUX__.gif

___-01.jpg

 

Have more questions? Submit a request

Comments