HT4189 - Guide - Add the 2nd pair of headphones


Keywords: 4189, HT4189, 2nd, second, add, headphone


Step 1: Powering up the transmitter, then turn on the HT4189 headphones and transmitter - they will connect automatically. 


Step 2: Enter the transmitter into PAIRING MODE manually - press and hold B for 2  seconds,  close to B flashes BLUE and RED alternately. 

Step 3: Place your 2nd headphones into Bluetooth PAIRING MODE (please refer to your 2nd headphones’ user manual). E.g. If your 2nd headphones are also from Avantree, like AS9S that included in the HT4189, pls enter it into Bluetooth PAIRING MODE -from its OFF state, press and hold the MFB for 5 seconds until the LED flashes RED and BLUE alternately, and you hear “Pairing” from the headphones.

Step 4: Keep the devices close to each other and wait. Once connected,  close to B on the transmitter will turn SOLID BLUE.

Reconnect - Next time, pls turn on transmitter and A headphones (in HT4189 set, A is always represent the AS9S headphones included), and wait for A headphones to work first (both transmitter and A headphones's LED are solid blue). Then turn on B headphones and click the main button on the B headphone once and wait for it to reconnect to the transmitter. Now both headphones should work. 



To achieve no audio lag effect, your 2nd pair of headphones MUST also support FastStream codec with less than 40ms latency, otherwise BOTH headphones will work using SBC codec with about 200ms latency.

For headphones support FastStream codec, you may consider one of the following -

  • Avanrtree HS063,
  • Avantree ANC031,
  • Avantree ANC032 


Have more questions? Submit a request