Oasis Plus - Guide - How to use with PC?

Follow

Keywords: Oasis Plus, pair, connect, PC

1) Oasis Plus works as a receiver( RX), PC works as a transmitter

  • Power up Oasis Plus – plug the USB cable into speaker USB or any USB power adapter (5V, 500mA-2A).
  • Slide Mode switch to the "RX" position.
  • Slide LL/HD switch to “LL” or “HD priority” position,as PC doesn't support HD or LL codec, so it doesn't matter it is on  “LL” or “HD priority” position.
  • Connect with Speaker / Soundbar with AUX/RCA+AUX/ optical audio cable
  • Pair the Oasis Plus with your Bluetooth-enabled PC
    • The Oasis Plus should enter pairing mode automatically or you can hold button for 2s – “RX” LED will alternately flash GREEN and WHITE.
    • RX.gif
    • Turn on Bluetooth on PC and search for “Avantree Oasis Plus “ - tap to connect.
    • Keep them close together and wait. Once connected, the “RX” LED will stop flashing and LED A will light up.
    • Single_connected_.jpg

2) PC is the audio source, Oasis Plus works as a transmitter (TX), connects to Bluetooth headpones/speakers.

  • Power up Oasis Plus – plug the USB cable into TV USB or USB power adapter (5V, 500mA-2A).
  • Connect suitable audio cable from PC to Oasis Plus with AUX or optical cable
  • Slide Mode switch to the "TX" position.
  • Slide LL/HD switch to “LL” or “HD priority” position whichi is decided by your receiving device.
  • Pair the Oasis Plus with your Bluetooth audio device
    • Hold button for 2s – “TX” LED will alternately flash GREEN and WHITE quickly.
    • TX.gif
    • Set your headsets/speakers to pairing mode (please refer to your user manual).
    • Keep them close together and wait. Once connected, the “TX” LED will stop flashing and A will light up.
    • Single_connected_.jpg
  • Enjoy the audio.

If no sound, please check if you have set " Oasis Plus" as default device on PC.

 

Have more questions? Submit a request

Comments