Oasis Plus - Guide - Status LED indicator

Follow

Oasis LED indicator as below -

Status  LED indicator  Voice Prompt Image 
TX - Pairing "TX" LED flashes GREEN and WHITE alternately Pairing mode - Please put your device into pairing mode and wait. TX.gif 
RX - Pairing "RX" LED flashes GREEN and WHITE alternately Pairing mode - Please put your device into pairing mode and wait. RX.gif 
Single connected LED A will light up. Connected. Ready for use. Single_connected_.jpg 
Dual link Connected LED A and B will light up. Connected. Ready for use.  Dual_link_Connected_.jpg
TX reconnected "TX" LED flashes WHITE  / TX-reconnected.gif 
RX reconnected "RX" LED flashes WHITE Reconnecting to the last paired device. RX-reconnected.gif 
Bypass(directly cable connection) Bypass is active when in OFF and TX mode Power on. Bluetooth transmitter mode with active bypass. TX.gif 
Connected with device using SBC (or APTX or aptX low latency,aptX HD ) codec SBC(or APTX or LL/HD) will be on / Connected_with_device_using_SBC.jpg 

Aux cable is not plugged in 

"OPT" LED is on  / Aux_cable_is_not_plugged_in.jpg 

Aux cable is plugged in

 

"AUX" LED is on / Aux_cable_is_plugged_in.jpg 
Pairing with unknown device. Turn off your wanted pairing device. LED A is still on / Single_connected_.jpg 
Have more questions? Submit a request

Comments