If your HT5009P headphones and transmitter fail to reconnect, please follow these steps to reconnect and lock them again. This may be because you paired your headphones with another device, or you're using a new replacement pair of headphones.
If your transmitter is connected to your TV's USB port, switch it to another power source, such as your wall outlet or laptop. Then, turn off the TV. This is to prevent interference from your TV.
Step 1: Get the transmitter into pairing mode.
- Connect the transmitter to a power source and turn it on.
- Press & hold the
button until you see the "1" LED indicator flashing GREEN & WHITE.
Step 2: Get the headphones into pairing mode.
- Turn off the headphones and then turn them back on.
- Slide the power switch to the "pair" position until the LED indicator begins flashing RED & BLUE.
Step 3: Wait for them to connect.
- Once connected, you will see the "AD" and "1" indicators turn solid WHITE on the transmitter. The LED on the headphones will turn solid BLUE.
Step 4:Lock them together again (very important).
- Press and hold the
button on the transmitter for about 10 seconds until the indicator turns GREEN for a couple of seconds.
Now the transmitter and the headphones are locked together and will always connect once turned on.
Comments
0 comments
Related articles
Please sign in to leave a comment.