Set Up 2: Power On & Connect the Headphones - HT5009 Plus

Note 2.1 The Headphones and the transmitter base in the SET are "Factory Locked." You don't need to manually pair them each time. All you need to do is turn both on and they should automatically connect within 2-5 sec.

Step 1: Power the Headphones ON.

• Slide the power switch to the middle "ON" position, you will hear "Welcome to Avantree"

Step 2: Power the Transmitter ON.

• Flip the Power Switch on the Transmitter to ON.  
• They should automatically connect with each other.
• Once connected, the headphone's LED indicator shows SOLID BLUE. The "1" and "AD" indicator on the transmitter are solid white. You'll also hear "CONNECTED" through the Headphones.
• If this is not the case, turn both devices off and turn them back on again.
• If for some reason this does not happen even you tried to turn them both off and on again, you might need to Manually Reconnect & Lock HT5009P again. 

Note 2.2 

You can also Connect a 2nd Pair of Headphones to HT5009P.

The next step is Adjust the TV Audio Settings