Ace 130 Overview - Buttons & Indicators – Avantree Support

   ① Multifunction Button      ⑤ One LED Lights Up
② Microphones ⑥ Two LEDs Light Up
   ③ LEDIndicators         ⑦ Three LEDs Light Up
   ④ Pairing Button    ⑧ Four LEDs Light Up

Function Table

Function Table	From Status	Action	LED Indicator	Voice Prompt
Power On	OFF	With Charging Case - Open the charging case Without Charging Case - long press the Main Button ① for about 3s	BLUE LED light on 1s	"Power On"
Power Off	ON	With Charging Case - Put the earbuds back into the charging case then close the case Without Charging Case - From ON mode, long press the Main Button ① for about 5s	RED LED light on 1s	"Power Off"
Pair	Not Connected	Open the case and wait for 8-10s OR Open the case, press & hold button ④ for 3-5s	Flashing RED & BLUE Alternately fast	"Pairing" / "Connected"
Play / Pause	When Music Playing	Click the Button ① once on either side	/	/
Previous / next track	When Music Playing	Hold the Button ① on Right / Left side	/	/
Answer/end a call	During a call	Click the Main Button ① once on either side	/	/
Volume up / down	Earbuds in use	Double-Click Button ① on Right / Left side	/	/
Reconnect	Connection Lost	Click connect from the phone, OR place back to case & take out again	/	"Connected"
Charge Earbuds	Buds outside case	Place Buds into case	RED LED on Buds	/
Charge Case	Case <4 lights lit up	Connect case to power source	RED LED on case	/
Activate / Deactivate "Video Reduced Latency" Mode	Connected to Avantree Center APP	Activate in the button setting page on the 'Avantree Center' app. Once activated, double click the Main Button on the earbuds.	/	"Game mode"/“Exit Game mode”
Reset / Clear Pairing History	Earbuds in the case, case lid open	Press & hold button ④ on case for 10 sec	Earbuds turn PINK for about 2 sec + Case flashes Blue 4 times	/

Note:

1. Button settings can be changed on app. Please search and download 'Avantree Center' in the app store on your device.
2. The button functions remain unchanged. If you use R earbud only, you can control volume up and next track via earbud only, vice versa for the L earbud.
3. R earbud acts as the default master earbud until you use the L earbud standalone with the R one powered off – the master earbud will change to L then. For subsequent use, the L earbud will enter pairing mode, i.e. the master one will enter pairing mode.

LED Indicators

LED Indicator Table	LED Pattern	Status
Earbuds	Fast Flash Blue & Red	Pairing Mode
	Light off	Connected
	Solid Red Light	Charging
	Blue Flashing once every 3s	Standby
	Red for 1s	Powered off
	Turn PINK for 2s	Pairing History Cleared
Case	Blue LED Light *1	Case Battery 25% or lower
	Blue LED Light *2	Case Battery 25-50% or lower
	Blue LED Light *3	Case Battery 50-75% or lower
	Blue LED Light *4	Case Battery 75% or higher

Related articles