Set Up 2: Connect the Headphones to Transmitter

Note 2.1: The Headphones AND the Transmitter that came in the HT5006 set are "Factory Locked." You don't need to manually pair them again. All you need to do is turn both devices ON and they should automatically connect.

Step 1: Power the Headphones ON.

Press & Hold the Power/MFB Button on the Headphone until the Indicator lights up. It should be Flashing BLUE.

Step 2: Power the Transmitter ON.

Flip the Power Switch on the Transmitter to TX (ON position).

Once you've turned both devices ON, they should Automatically Connect with each other. When Connected, the Indicator on Headphone will turn SOLID BLUE, and the "A" Indicator on the Transmitter will light up.

You'll also hear "CONNECTED" through the Headphones.

If the LED incicator is still blinking and you do not hear the "connected" voice prompt, the Headphone isn't connected to the Transmitter. Please follow the link below to do so MANUALLY.

Manually re-pair and connect the headphones to the transmitter

Now you may proceed to Part 3.

IF you'd like to Connect a 2nd Pair of Headphones, please follow the Link below.

Connect a 2nd Pair of Headphones to HT5006