How to pair, connect & lock the headphones to Opera transmitter?

If your Opera headphones and transmitter fail to reconnect, please follow these steps to reconnect and lock them again. This may be because you paired your headphones with another device, or you're using a new replacement pair of headphones.

1. If your transmitter is connected to your TV's USB port, switch it to another power source, such as your wall outlet or laptop. Then, turn off the TV. This is to prevent interference from your TV.

2. Reset the Opera Headphones.
After turning on, press and hold both “+” and “-“ for 6 seconds until the RED and BLUE LEDs turn on simultaneously for 2 seconds (may look PINK). After a while, it will enter pairing mode automatically with the LED flashing RED and BLUE.

3. Enter Pairing Mode on the Transmitter.
Hold the OFF/ON/PAIR button in the PAIR position for 5 seconds. The LED indicator will flash red and blue to indicate pairing mode.

4. Lock them.
*Press and hold the LOCK button for ten seconds.
*The front LED indicator will turn pink to indicate a successful lock and then switch to solid blue.

Now the transmitter and the headphones are locked together and will always connect to each other once turned on.